Tokheim ProGauge MAGLINK LX, Руководство по настройке

Страница: 14 / 28

MAGLINK LX Configuration Manual | "Admin" Pages
Rev. 09,
– April 2016
Page 14 of 28
8 T
HE
"A
DMIN
"
PAGE
8.1 System
The following image shows the "Systems Page":
The page displays system information and parameters applied to all connected probes. The following table
lists the parameters that can be set:
Parameter Description
Total tanks Number of connected probes (From 1 to 32)
Total dispensers Number of connected dispensers (From 1 to 32)
Total Slaves (Reserved for future use)
Sensors (Reserved for future use)
Protocol Type
Select from among the following:
•
DIALOG
•
DOMS
•
FUEL POS
•
GILBARCO
•
ORPAK
•
PIGNONE
•
RETALIX
•
Probe emulation
TCP Port Gilbarco protocol via TCP
Temperature of comp.
volume
Selectable values for the calculation of the compensated volume:
•
15 °C
•
20 °C
Station name Station name
History range
Time interval between a history saving data
ATTENTION: It is highly recommended to set the value to 1 minute
Probe sensitivity
Allow setting the value to 0.5
ATTENTION: Do not change unless instructed by Start Italiana S.r.l.
Language Select the language of the console display
Measurement unit
Select from among the following:
•
mm/litre
•
inches/gallon
•
mm/gallon
Date format
Select from the following date formats:
•
yyyy-MM-dd
•
dd-MM-yyyy
•
MM-dd-yyyy
Auto Print
Select when to perform the following automatic stamp:
•
Shift report, at the beginning and end
•
Alarms, at every status change
•
Delivery, at the beginning and end
•
Losses, upon detection of a loss
•
Reconciliation, set the "Time" for reconciliation