Tokheim Crypto VGA, Компонентное техническое руководство

Страница: 67 / 74

Component Technical Manual Crypto VGA
Document Ref 942179-001 Rev 1
Page 6-5
Issue A
6.5 Printer Cutter Units/Blades
Only Tokheim authorised service engineers are permitted to replace the printer cutter
unit. Contact your nearest Tokheim SSD (refer to back cover of this manual).
6.6 Cleaning the Display Screen
The Crypto VGA touchscreen should be cleaned every two weeks using a Tokheim Cleaning
Kit.
IMPORTANT : Excessive use of water or any other liquids will invalidate your
warranty.
To clean the screen, the keys must be disabled first:-
1) Follow the instructions in section 6.1 to enter Maintenance/Service
mode.
2) Follow the on-screen instructions to select Clean Screen (a 10 second
countdown timer allows the screen to be cleaned)
3) Use the Wet Synthetics Cleaning pad to clean the touchscreen surface
and the front fascia
4) Use the dry Lint-free fleece cloth to dry the touchscreen and front
fascia.
5) Close the Crypto VGA printer drawer to reset alarm.
6) Return the relevant Crypto VGA to Normal mode at the POS.
Note : a Starter Cleaning Set (6 wet/dry twin pads, 3 magstripe cleaning cards, 1 chipcard
cleaning card) is included in the Crypto VGA delivery. Subsequent packs can be orderded
from your local Tokheim SSD.