TRADITIONAL & MODERN WEAVING TECHNOLOGY SINCE 1898
PERINTEISTÄ JA NYKYAIKAISTA KUDONTATEKNOLOGIAA VUODESTA 1898 ALKAEN
TOIKA OY
Puh. (03) 542 1095
Phone: +358-3-542 1095
Haittilantie 4 A
37800 AKAA
S-posti:
E-mail:
FINLAND
Kotisivut:
Internet:
THE JAANA LOOM
THE PARTS OF THE LOOM
(1)
Upper side part
(2)
Lower side part
(3)
Lower back rail with 2
bolts
(4)
Front rail with 2 bolts
(5)
Warp beam with metal
handle
(6)
Cloth beam with release
handle
(7)
Castle frame
(8)
Breast beam (same as
(10))
(9)
Knee beam (thinner)
(10)
Back beam
(11)
Jacks
(12)
Treadle bar
(13)
Treadles
(14)
Upper lams
(15)
Lower lams
(16)
Beater with 4 bolts
ASSEMBLY
The loom parts are fastened to the side part with a six-angled screw and its
counterpart (a suitable tool is included). Leave the counterpart’s furrow to be seen.
1.
Fasten the upper side parts (1) to the lower side parts (2) with
screws.
2.
Let the right side part of the loom (2) lean against a wall. Screw the
lower back rail (3) and the front rail (4) to the side part.
3.
Put the warp beam (5) in its place in the right side part of the loom
and turn the metal handle in place. This will hold the warp beam in
place.
4.
Put the release handle on the axle of the cloth beam and push the
cloth beam (6) in its place in the right side part of the loom.
