Tohnichi MPQL Скачать руководство пользователя

Страница: 23 / 24

■

MARKING TORQUE WRENCH

For previous version of Socket and Marker Head

As of May 21 , 2016, the socket and the marker head of marking torque wrench were changed the design.

Along with it , the old socket (No.1700 to 1723) and the old marker head (No.1783 to 1785) can not be

used as it is . In case using the old socket and the former marker head , please refer to the following.

6.1. Combination of Previous Socket and New Marker Head

(No. 2780, 2782, 2783, 2785).

1） In applying Φ5 of the marker head MK53RB (No.2780) or MK53WY (No.2782) for the old

sockets width 10 to 16mm (No.1700 to 1704, No.1712 to No.1715).

① Pull out the marker return spring from inside of the socket.

② Set the marker on the socket according to a set method of the marker on the page 13.

Maker Return Spring

Pull out using long-nose

pliers.

Old Socket

No.1700 to No.1704

2） In applying Φ9 of the marker head MK93RB (No.2783) or MK93WY (No.2785) for the old

sockets width 17 to 30mm (No.1705 to 1723, No.1716 to No.1723).

① Pull out the marker guide from inside of the socket.

Old Socket

No.1705 to No.1723

Marker Guide

Belonging to old socket

W17 or larger

Maker Return Spring

When pulling out the marker return

spring, it sometimes flies out.

Be careful not to get injured.

Caution

英語版̲MPQL・MPQL4・MQL・MQSP取説.indd 22

2016/07/19 12:56:08

Содержание MPQL

























Результаты поиска

Содержание MPQL

Отзывы:

Похожие инструкции для MPQL

Бренды по названию

Популярные бренды

Tohnichi MPQL, Руководство по эксплуатации

Результаты поиска

Содержание MPQL

Отзывы:

Похожие инструкции для MPQL

Бренды по названию

Популярные бренды