CTB Retightening Torque Wrench
Quick Start
10) Value will change to initial tightening torque value. The “P” will no longer
be at the end of the value and displayed value will be lower. This reading
should be very close to the original tightened torque.
11) If you do not pull until ,green light goes on , “E-1” error alarm will sound
and display will flash. You must clear the display and start again.
12) To access statistical, functions move counter to the highest count number
that data is stored press “MD” to see total number in sample (N)
13) Press “MD” a second time to see “Hi” value in sample
14) Press “MD” a third time to see “Lo”value in sample
15) Press “MD” a fourth time to see “—” average value of sample.
For long term storage, use jack plug to shut off battery to gyro sensor. This will
help keep battery from draining quickly. After jack is removed, allow wrench to
stabilize 20 minutes before use.
For further assistance, call 1-847-272-8480
Contact us for information regarding downloading data to Excel file.
