ENGINE OPERATION
38
7
6. Turn the main switch key to the START
position and release it to start the
engine. The engine will crank continu-
ously until the engine starts.
ENON00942-0
Note
z
It takes maximum 4 seconds of the
continuous crank before the engine
starts.
z
If fail to start the engine, crank again
after 10 seconds or more.
1.
Main switch key
2.
Warning lamp
7. Check the cooling water from cooling
water check port.
ENOM01807-0
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1.
Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position. Do not raise the free throt-
tle lever when starting the engine.
1.
Neutral (N)
2.
Control lever
3.
Fully opened (Forward)
4.
Fully opened (Reverse)
5.
Free throttle lever
6.
Main switch key
7.
Stop switch
R
N
F
OFF
ON
START
PUSH TO IDLE CHANGE
1
2
ENOF00867-1
ENOF02408-0
1
ENOF00869-1
N
R
F
1
2
3
4
5
6
7
ENOF00870-1
