TOHATSU F5D LPG, Руководство пользователя

Страница: 37 / 70

ENGINE OPERATION
37
7
ENOM00053-A
Improper trim angle (bow rises too
high)
Set the thrust rod (or preset knob) lower
if the bow of the boat rises above hori-
zontal.
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod (or preset knob) higher
if the bow of the boat is below horizontal.
1. Trim angle adjustment hole
2. Thrust rod
3. Higher
4. Lower
Trim angle adjustment (Manual tilt type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral position.
3. Tilt up the outboard motor.
4. Remove the thrust rod as shown pic-
ture.
1. Push in
2. Rise the stopper
3. Pull out
5. Reinstall the thrust rod in the desired
position securely.
6. Gentry tilt down the outboard motor.
ENOM00060-A
ENOW00055-0
Do not tilt up or down outboard motor when
swimmer(s) or passenger is near to prevent
them from being caught between outboard
motor body and clamp bracket in case the
outboard motor body falls.
ENOW00048-0
When tilting up or down, be careful not to
place your hand between the swivel bracket
and the stern bracket.
Be sure to tilt the outboard motor down
slowly.
ENOF00052-0
ENOF00053-0
1
2
4
3
ENOF00440-0
8. Tilt up and down
WARNING
WARNING
3
2
1
ENOF01238-1