Togo POWER PIONEER 330, Руководство пользователя

Страница: 10 / 16

OPERATING INSTRUCTIONS
POWERING / CHARGING DEVICES
Connect the provided AC Wall Power Adapter to Input Port, and allow PIONEER 330 to fully
charge prior to use. When charging, the LCD Screen will be illuminated, and the LCD display
will show battery level, PIONEER 330 is fully charged when it shows 100%.
It is recommended to FULLY charge PIONEER 330 every 3 months to maintain the health of the
battery pack.
Select the type of outputs required by pressing the DC/USB/AC OUTPUT ON/OFF BUTTON.
The output ports will NOT function until the appropriate button
(
s) is pressed to activate the ports.
When output port(s) is activated, the indicator on the button will illuminate green, indicating
that the output(s) are active, and the LCD display will turn on and provide details on the
charging output.
The LCD Screen will automatically shut down when no outputs are activated.
Automatically turn off AC Outlet power.
• The indicator light of LCD Screen still illuminated.
• DC Outputs Status still the same status as usual.
Check the input charge cable. The ports will be efficient when the input charge cable meets the
specification outlined in the GENERAL SPECIFICATIONS section.
• Only charge PIONEER 330 with provided AC wall power adapter.
The advanced battery management system of the PIONEER 330 allows it to charge a connected
device via DC outputs & USB outputs & AC output while charging the PIONEER 330.
Press the ON/OFF BUTTON(s) to shut down the output(s) when not in use.
PASS-THROUGH CHARGING
OVERLOAD CONDITION
If an overload condition occurs on the OUTPUT ports, PIONEER 330 will:
Do the following:
CHARGING PIONEER 330
8