5
D.
Power ON and Pairing
1.
Press and hold the
“ (6)”
button for 2 ~ 3 seconds to turn On the
device, a series of tones will sound and the
“Mode LED (5)”
will fast
blinking in
blue
(half second once). It is in Bluetooth’s searching or
pairing mode;
2.
Then, activate the Bluetooth function in your mobile device (such as
Mobile Phone, MID or Personal Computer); the mobile device will
enter to Bluetooth searching mode automatically, if not, tap the
relate selection to manually enter to searching mode.
(refer to your
mobile device’s manual when necessary)
3.
Your mobile device should show
“BTS26”
in list, and then select it for
pairing. Waiting for some seconds, then you will see connected
message as shown on your mobile Bluetooth device when they are
connected and paired.
4.
For some mobile Bluetooth devices, you may need to input
“0000”
as pairing password.
5.
However, if pairing is successful, the
“Mode LED (5)”
indicator will
switch to slow blinking from fast.
6.
Now, you can start to music play from the mobile device by it music
player program.
7.
Press and hold the
“ (6)”
button to turn Off the device when it is
not in use.
Mode LED Function for Bluetooth:
Item Mode
Description
LED Status
1.
Power OFF
Light Off
2.
Power ON
At BT pairing mode Light fast blinking in
blue
(half second once)
At BT paired mode Light slow blinking in
blue
(4 seconds once)
Note:
For saving battery energy, the
Bike Bluetooth Speaker
will turn to
off mode automatically when no device is in paired in 8 minutes.
E.
Disconnect from paired device
1.
To disconnect with paired device and for better result, turn OFF the
Bike Bluetooth Speaker
by power ON/OFF button directly. Or,
2.
You can choose disconnect from the mobile device’s list by the
paired device, however, most devices will go back to reconnection
mode in seconds. Means the
Bike Bluetooth Speaker
may again
reconnected with the paired device within some seconds
automatically. So, turn OFF the Bluetooth function on you mobile
device in this case if you want.
