Q6: How to log in the WEP page?
A6: Set the computer with static IP address as shown in Page 4-5, and type the IP
address of the corresponding device in IE browser.
Q7: After the connection of the AP and NVR, why the IP address of the camera can
be found but no video available on the monitor?
A7: Connect the adapter which links to the NVR with the yellow LAN port of the AP.
Q8: The status of signal light
A8: Red: PWR: The power light. It will work when power is on.
Blue: WLAN: WIFI signal light. It will strobe when working.
LAN1,LAN2: The LAN1/LAN2 light. It will be on when working.
Orange: Wireless signal light from 1st - 4th
1st light on: the signal is too weak.
1st , 2nd lights on: signal is weak.
1st, 2nd, 3rd lights on: the signal is regular.
ONLY the 4th light on: the signal is too strong.
If four lights are on, the signal is in the best condition
Q9:How to reset the device?
A9:Long press the RST button for 6 seconds in the state of power-on.
７
ＬＡＮ２
１ｓｔ
２ｎｄ ３ｒｄ ４ｔｈ
ＬＡＮ１
ＷＬＡＮ
ＰＯＷＥＲ
８
The dial-up code corresponding to the text (manual) mode, the network segment and
frequency can refer to the following table.
Group
No.3
No.4
No.5
No.6
No.7
No.8
No.9
No.10
No.11
No.12
No.13
No.14
No.15
No.16
ＩＰ ｓｅｇｍｅｎｔ
172.19.0.X
172.19.1.X
172.19.2.X
172.19.3.X
172.19.4.X
172.19.5.X
172.19.6.X
172.19.7.X
172.19.8.X
172.19.9.X
172.19.10.X
172.19.11.X
172.19.12.X
172.19.13.X
172.19.14.X
172.19.15.X
Ｆｒｅｑｕｅｎｃｙ
5180
5200
5220
5240
２－８ Ｄｉａｌ
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6
2 3 4 5 6 7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
7 8
No.1
No.2
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
Disable for users
