Tobii Dynavox T10+, Руководство пользователя

Страница: 23 / 32

Guidance and manufacturer’s declaration – electromagnetic emissions
The T-Series is intended for use in the electromagnetic environment specified below. The customer or the user
of the T-Series device should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic environment –
guidance
RF emission
CISPR 22 The T-Series uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emissions
CISPR 22 Class B The T-Series is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2 Class A
Voltage Fluctuations/flicker
emissions IEC 61000-3-3
Complies
The T-Series device should not be used adjacent to or stacked with other equipment.
Guidance and manufacturer’s declaration – electromagnetic immunity
The T-Series device is intended for use in the electromagnetic environment specified below. The customer or
the user of the T-Series device should assure that it is used in such an environment.
IMMUNITY test
IEC 60601 test level Compliance level
Electromagnetic
environment – guidance
Electrostatic discharge
(ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood,
concrete or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be at
least 30 %.
Electrical fast transient/burst
IEC 61000-4-4
± 2 kV for power supply
lines ± 2 kV for power supply
lines Mains power quality should
be that of a typical
commercial or hospital
environment.
Surge
IEC 61000-4-5
± 1 kV line(s) to line(s) ± 1 kV line(s) to line(s)
Mains power quality should
be that of a typical
commercial or hospital
environment.
T-Series Devices User’s manual v.2.2 - en-US
Appendix B Compliance Information
23