11.
10.
To Brew a Second Pot of Coffee
To brew a second pot of coffee, wait 15 minutes and allow it to cool.
Empty used coffee grounds and repeat steps for brewing coffee.
CAUTION:
Failure to allow coffee maker to cool may cause water to
overheat and spray hot steam. The hot steam can cause severe burns.
User Maintenance Instructions
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Contact a qualified
appliance repair technician if the product requires servicing.
Use and Care for Your 8-Cup
Thermal Coffee Maker
A damaged Thermal Carafe may result in possible burns from hot
liquid. To avoid breaking a Carafe:
1. Discard Carafe if damaged in any manner. A chip or crack could
result in breakage.
2. Do not use cleaning agents or wire bottle brushes to clean the
inside of the Thermal Carafe.
3. Do not place the Carafe on or near a hot gas or electric burner, in
a heated oven, or in a microwave.
4. Avoid rough handling and sharp blows.
Cleaning Your 8-Cup Thermal
Coffee Maker
CARE AND CLEANING
1. Make sure coffee maker is in the OFF position. The Power
Indicator Light will be off.
2. Unplug and allow to cool completely before cleaning.
3. Lift the Coffee Maker Lid and remove the Removable Filter Basket
by the handle. Discard coffee grounds and paper filter. Wash and
dry all removable parts.
CARE AND CLEANING (CONT.)
4.
Mineral deposits can be removed from the coffee maker by
following the "Descaling" instructions. No parts should be cleaned
in a dishwasher.
5.
Clean the outside of the coffee maker with a damp cloth.
CAUTION: Do not immerse cord, plug, or coffee maker unit
water or other liquid.
DESCALING
We recommend that you descale your coffee maker once a month
because mineral deposits can form a coating in the coffee maker,
causing slower brewing time and possibly an off flavor in the coffee.
Use a cleaner recommended for coffee makers. To descale your unit:
1.
Place a paper filter into the Removable Filter Basket. Make sure
the Removable Filter Basket fits securely so Coffee Maker Lid
closes properly (Lid will snap into place).
2.
Fill Carafe with one part white vinegar to three parts cold water.
Pour the water and vinegar solution into the Water Reservoir.
3.
Place the empty Thermal Carafe with Lid on the Base Plate. Plug
the coffee maker into an outlet and switch the coffee maker ON.
4.
Keep the coffee maker ON until the Thermal Carafe is half full.
(At 4 cup mark on Water Level Indicator.) Switch the coffee
maker OFF and let cool for 1/2 hour.
5.
After 1/2 hour, pour the water and vinegar solution back into the
coffee maker.
6.
Place an empty Thermal Carafe with Lid on the Base Plate.
Switch the coffee maker ON and let all the water and vinegar
solution flow through.
7.
Discard the solution and paper filter.
8.
After allowing the coffee maker to cool for 15 minutes, flush out
all the traces of vinegar by pouring a Carafe full of cold water
into the Water Reservoir. Make sure to insert a fresh filter into
the Filter Basket before brewing and place the empty Thermal
Carafe with Lid on the Base Plate. Switch the coffee maker ON
and allow it to cycle through.
9. At the end of the brew cycle, the coffee maker will automatically
shut off. Discard water in the Thermal Carafe. Repeat steps 8-9.
Unplug the coffee maker when finished.
8-Cup Thermal Carafe Coffee Maker with Digital Clock/Timer Use and Care Guide