background image

NOMENCLATURE

Power Switch

Press this switch to turn power on.  To turn power

off, press this switch again. Power Indicator lights
when the power is switched on.

Power Indicator

Tuner Receptacle

Insert an optional tuner module WTU-770 or WTU-

771.

Volume Control

Adjusts the output volume.

Reception  Indicator

Lights when the tuner receives the  RF signal.

Level Indicator

Lights in proportion to the intensity of input into a

wireless microphone.

Frequency Label

Attach the label (supplied with the WTU-770 and
WTU-771)to the  unit.

Blank Panel

Antenna Connector

(BNC, 75 

    , 

 Phantom Power Ouptut : 9V DC)

Connects to an optional wireless antenna, and
supplies DC power to the YW-620  having a built-in
booster amplifier.

Audio Output XLR Connector

( – 6 0 dBV, Output Impedance : 600  , Balanced)
Provides individual outputs of built-in tuner
modules.

Mixing Output

Line Output : 0 dBV, Output Impedance : 10 k

 ,

Unbalanced

Mic output : – 6 0 dBV, output impedance : 600

 ,

Unbalanced
Mixes built-in tuner module outputs.

Mixing Output Level Selector

Switches mixing output levels.

Line Output : Connects to the line (AUX) input

terminal of connected component.

Mic Output : Connects to the mic input terminal of

connected component.

DC IN (12V DC)

Power input terminal for external DC power supply.

AC Inlet (3 pins)

Power input terminal for AC power supply. Use the

supplied power cord.

[Rear Panel]

[Front Panel]

–3–

Содержание WT-770









Отзывы: