background image

133-07-265-30

URL:  http://www.toa.jp/

10. SPECIFICATIONS

Microphone Element 

Electret condenser type, cardioid pattern

Modulation Frequency 

modulation

Frequency Range 

636 – 698 MHz, UHF

Selectable Channel 

64 channels

RF Carrier Power

Less than 50 mW 

Tone Frequency

32.768 kHz

Oscillator

PLL synthesized

Maximum Input Level

126 dB SPL 

Maximum Deviation

±40 kHz 

Audio Frequency Response

100 – 15,000 Hz 

Dynamic Range (AF Circuit)

More than 95 dB (with WT-5800)

Battery LR6 

(AA)

Battery Life 

More than 10 hours (alkaline)

Indicator

Power/Battery lamps 

Antenna

Built-in type

Operating Temperature 

–10 to +50°C

Finish 

Resin, rubber coating

Dimensions 

ø43.6 x 231.5 mm

Weight 

180 g (with battery)

Note:

The design and specifications are subject to change without notice for improvement. 

• Accessories

Microphone holder (with stand adapter) ............... 1
Screwdriver (for setting)  ....................................... 1

Storage case  ........................................................ 1

License requirement

The term "IC:" before the radio certification number only signifies that Industry Canada Technical
specifications were met. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

IMPORTANT NOTE: 

To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user's authority to
operate the device.

Содержание WM-5220

Страница 1: ...en placing it in close proximity to the medical equipment When the unit is not in use for 10 days or more be sure to take the battery out of the unit because battery leakage may cause personal injury or contamination of environment Make sure to observe the following handling precautions so that a fire or personal injury does not result from leakage or explosion of the battery Do not short disassem...

Страница 2: ...the switch in the L position factory preset Leave the switch setting to qualified service technicians BANK CHANNEL 4 3 2 1 4 5 6 7 8 9 A B C D E F 0 3 2 1 BANK CHANNEL 4 3 2 1 4 5 6 7 8 9 A B C D E F 0 3 2 1 4 HANDLING PRECAUTIONS Do not expose the unit to rain or an environment where it may be splashed by water or other liquids as doing so may result in unit failure Never open nor remove the unit...

Страница 3: ...the tuner the tuner does not receive the microphone signal BANK CHANNEL 4 3 2 1 4 5 6 7 8 9 A B C D E F 0 3 2 1 Channel selector switch 9 OPERATIONAL HINTS The microphone s service distance is 3 120 m When the microphone user moves in a facility signal dropouts momentary losses of signal reception may be encountered These dropouts are caused by the building s architectural designs or materials whi...

Страница 4: ...Weight 180 g with battery Note The design and specifications are subject to change without notice for improvement Accessories Microphone holder with stand adapter 1 Screwdriver for setting 1 Storage case 1 License requirement The term IC before the radio certification number only signifies that Industry Canada Technical specifications were met Operation is subject to the following two conditions 1...

Отзывы: