Toa WM-3210, Инструкция по эксплуатации

Страница: 4 / 5

4
(6) Assembly and Disassembly of the Unit
<Disassembling the unit>
1. Holding the Mic Body, turn the Battery Case (microphone grip) counter-clockwise to remove it.
2. Take out the battery.
3. Using the Phillips screwdriver, remove the screw holding the Antenna Cover to remove the Cover.
4. Using the soldering iron, take off the soldered joint of the antenna cable on the printed circuit board.
5. Remove the windscreen by turning it counter-clockwise.
6. Using the Phillips screwdriver, remove the screw holding the Name Ring, then remove the Name Ring and
the microphone's internal lock holder.
7. Remove the Switch Holder.
8. Take the printed circuit board out of the microphone body.
<Assembling the unit>
To re-assemble the disassembled microphone, reverse the procedures above.
(6) Wind Screen
Name Ring
P.C.B.
Rock Holder
(5)
(7) Switch Knob and Holder
Antenna Cover
(4)
(1)
(2)
(3)
Battery Case
Battery
BODY MIC