12
9.2. Playback
Eject
Cassette door
Stop button
Play button
(Direction indicator lamp)
Pause button
(Pause indicator lamp)
Tape volume control
Tape speed control
Operating mode selector switch
Step 1.
Set the power switch to the ON position.
Step 2.
Press the EJECT [
] to open cassette door, and insert the cassette with its exposed tape surface
facing down.
Step 3.
Select the tape operating mode using the Operating Mode selector switch. For more information on
the operating modes, refer to p. 16.
Step 4.
Press the desired Play button [
] or [
]. The tape will begin to play, and the Direction indicator
lamp will light to indicate the current tape direction.
Step 5.
Adjust the Tape Volume control.
Step 6.
Tape speed can be adjusted by rotating the Tape Speed control.
Step 7.
To temporarily stop the tape during playback, press the Pause button [
]. The deck will be put in
standby mode, the Pause indicator lamp will light, and the Direction indicator lamp will flash. To
restart playback, press the Pause button or the flashing Play button.
Step 8.
To completely stop playback, press the Stop button [
].
Note
Do not turn OFF the power switch during tape operation because the tape cannot be ejected. In such cases,
switch the power back ON again, and then press the Eject.
