Toa TZ-S60W AS, Инструкция по эксплуатации

Страница: 7 / 12

o
30 °
30 °
o
ACCESSORY ACCESSORY ACCESSORY ACCESSORY
((((Brackets are not yet installed on the speaker))))
5.2. 5.2. 5.2. 5.2. Speaker Cable Speaker Cable Speaker Cable Speaker Cable Con Con Con Conn n n nection ection ection ection
5.3. 5.3. 5.3. 5.3. Wall Mount Wall Mount Wall Mount Wall Mount Installation Installation Installation Installation
5.3.1. 5.3.1. 5.3.1. 5.3.1. Using Using Using Using pre pre pre pre----installed installed installed installed brackets brackets brackets brackets....
Step 1.
Step 1. Step 1.
Step 1. Connect the speaker cable to input terminal, where the cable must pass through the hole in the wall
bracket so that the cable do not obstruct the speaker from coinciding with the wall. (refer to below
illustration).
Step
Step Step
Step 2
2 2
2.
. .
. Install 4 pieces of screws , two screws should be paralleled above the other 2 screws. The width
distance between the 2 screws is 60mm, height distance is approximately 460mm between the two
screws above and below, and the depth distance of each screw is more than 4mm from the wall
surface. (refer to below illustration).
[Input terminal polarity]
[Striped conductor of cable]
7
[Speaker bracket] [Speaker bracket] [Speaker bracket] [Speaker bracket]
[Joint bracket] [Joint bracket] [Joint bracket] [Joint bracket] [Wall bracket] [Wall bracket] [Wall bracket] [Wall bracket]