Toa TS-820 Series Скачать руководство пользователя страница 35

Страница: 35 / 68

11.1.2. Recharging

BC-900 Battery charger

AC adapter (supplied

with the BC-900)

Power input terminal

Power switch

Charging status indicator

(Red/green)

Power cord (supplied

with the BC-900)

BP-900A Lithium-ion battery

Use the BC-900 Battery charger to recharge the BP-900A Lithium-Ion battery.

Step 1. Connect the power cord to the supplied AC adapter.

Step 2. Connect the AC adapter to the Charger's power input terminal.

Step 3. Insert the AC plug into the AC wall outlet.

Step 4. Turn on the power switch.

The Power indicator lights green.

Step 5. Insert the battery fully into one of the Charger's battery receptacles with the battery oriented to the

proper direction.

Ensure that the Charging status indicator lights red. If it does not light, check to see if the battery is

correctly inserted.
Charging is completed within 5 hours and the Charging status indicator lights green.

Note

Switching the Charger's power OFF and back ON again with fully-charged (charging completed) batteries

inserted will result in repeated recharge of the batteries. Battery life could deteriorate from this repetitive

charging.

Stop charging if batteries are not fully charged within 5 hours.

Continuously charging over 5 hours may cause batteries to fire,explode,

leak, or heat.

WARNING

Remove the power supply plug of charger from the AC outlet after

charging completion, as doing otherwise may cause a fire.

CAUTION

Содержание TS-820 Series





































































Результаты поиска

Содержание TS-820 Series

Отзывы:

Похожие инструкции для TS-820 Series

Бренды по названию

Популярные бренды

Toa TS-820 Series, Инструкция по эксплуатации

Результаты поиска

Содержание TS-820 Series

Отзывы:

Похожие инструкции для TS-820 Series

Бренды по названию

Популярные бренды