MODEL NUMBER
Enclosure
Speaker
Power Capacity
Continuous Pink Noise
Continuous Program
Impedance
Sensitivity
Frequency Response
Recommended Crossover
Frequency
Input Terminals
Finish (Enclosure)
Dimension
Weight
Standard Accessories
SW-38W-UL
SW-38S-UL
Vented (bass reflex) type
Two 15" woofers
300 watts RMS of band limited pink noise
(40~1kHz)
900 watts
4 ohms (parallel) or Two 8 ohms
(independent)
96dB (1W/1m)
One 15" woofer
150 watts RMS of band limited pink noise
(40~1 kHz)
450 watts
8 ohms
93dB (1W/1m)
35~1 kHz
60~100Hz
Screwtype
Painted grey
600(H)x950(W)x600(D) mm
23.6(H)x37.4(W)x23.6(D) inches
74kg (163 Ibs)
600(H)x490(W)x600(D) mm
23.6(H)x19.3(W)x23.6(D) inches
40kg (88 Ibs)
Instruction Manual 1
Warranty Card
1
Right-hand side woofer
(Viewed from the front)
SW-38W-UL
SW-38S-UL
Blank panel (for mounting female XLR connector)
Blank panel (for mounting male XLR connector)
The two woofers of the SW-38W-UL are connected in pa-
rallel when jumper pieces are used (impedance is 4
ohms). Removal of the jumper pieces disconnect the two
woofers from each other, allowing each of them to be
driven independently by means of their respective ampli-
fiers (impedance of each is 8 ohms). By removing the
blank panels two female XLR connectors (38W) or one
each of male and female XLR connector (38S) can be
mounted. To do wiring work, remove the rear-mounted in-
put panel.
SW-38W-UL
SW-38S-UL
Left-hand side woofer
Jumper piece
Input panel
Fixing screw
Screwtype terminals
[Fig 1]
(Using an external frequency dividing network)
Specifications
Input Panel
)
Characteristic Diagrams (1W/1m: ¹/
3
Octave Pink Noise
