5
Input indication change
Bi-amplifi er terminal label (supplied)
Bi-amplifi er rating label (supplied)
Panel mounting screw
1, 4
2
Input panel
3
Connector connection
change
Label
11. CHANGING SINGLE-AMPLIFIER DRIVE TO BI-AMPLIFIER DRIVE SYSTEM
The single-amplifi er drive system can be changed to a bi-amplifi er drive system by changing the speaker‘s
internal wiring after removing the input panel located at the back of the speaker.
[How to change]
Step 1.
Remove the 4 Input panel mounting screws to remove the input panel.
Step 2.
Carefully pull out the short length of wiring connected to the back of the input panel.
Step 3.
Unplug 2 pairs of connected connectors, and reconnect them so that connections are made between
labeled connectors and between unlabeled connectors.
Step 4.
Reattach the input panel to the speaker using the 4 screws.
Step 5.
Affi x the supplied label to the input panel to change the indication.
12
