background image

SR-C8L

SR-C8S

Bass-reflex type

Continuous program: 360 W (single-amplifier operation)
Low frequency:          360 W, high frequency: 180 W (bi-amplifier operation)

16 

Ω

(single-amplifier operation)

Low frequency: 16 

Ω

, high frequency: 16 

Ω

(bi-amplifier operation)

98 dB (1 W , 1 m) (single-amplifier operation)
Low frequency: 95 dB (1 W, 1 m), high frequency: 110 dB (1 W, 1 m) (bi-amplifier operation)

65 — 20,000 Hz (when an optional DP-0206 digital processor is used)

1,600 Hz (when the optional DP-0206 digital processor is used)

Horizontal: 110°,  Vertical: 5°

Horizontal: 110°,  Vertical: 15°

Low frequency:  20 cm cone type

Low frequency:  20 cm cone type

High frequency: Wave-front control horn

High frequency: Wave-front control horn 

110°(horizontal) x 5°(vertical)

110°(horizontal) x 15°(vertical) 

+ Compression drivers x 2

+ Compression drivers x 2

M5 screw terminal, distance between barriers: 12.2 mm,
Neutrik NL4MP connectors x 2
Enclosure: Plywood, black, urethane paint
Mesh grille: Rolled steel plate, black, paint

526.6 (w) x 293 (h) x 296 (d) mm

526.6 (w) x 293 (h) x 294 (d) mm

17 kg

16 kg

M8 connection bolts ...... 4
Cluster bracket: SR-CL8
Rigging frame:

SR-RF8

Tilt joint bracket: SR-TP8
Digital processor: DP-0206

14. SPECIFICATIONS

30

Model No.
Enclosure
Allowable Input

Rated Impedance

Output Sound
Pressure Level
Frequency Response
Crossover Frequency
Directivity Angle
Internal Speaker

Input Terminal

Finish

Dimensions
Weight
Accessories
Optional Components

14.1. SR-C8L and SR-C8S

14.2. SR-C15B

Note:

The design and specifications are subject to change without notice for improvement. 

Note:

The design and specifications are subject to change without notice for improvement. 

Bass-reflex type
Continuous program: 450 W

Ω

93 dB (1 W, 1 m)

40 to 400 Hz (when an optional DP-0206 digital processor is used)
80 Hz (when the optional DP-0206 digital processor is used)
38 cm cone type
M5 screw terminal, distance between barriers: 12.2 mm,
Neutrik NL4MP connectors x 2
Enclosure:  Plywood, black, urethane paint
Mesh grille: Rolled steel plate, black, paint
526.6 (w) x 594.8 (h) x 550 (d) mm
41 kg
M8 connection bolts ...... 4
Rigging frame:

SR-RF8

Digital processor: DP-0206

Enclosure
Allowable Input 
Rated Impedance
Output Sound 
Pressure Level
Frequency Response
Crossover Frequency
Internal Speaker
Input Terminal

Finish

Dimensions
Weight
Accessories
Optional Components

Содержание SR-C15B

































Отзывы: