TOA Corporation
5.
NETWORK SETTINGS
SP-11N has a Web (HTTP) server function for setting.
Factory default settings:
SP-11N doesn
’t have any static IP address setting by factory default. “0.0.0.0”
When connected with the network with a factory default setting, using IPzator
™
*
technology,
the unit itself finds out the applicable IP address in the network segment automatically.
If there is no network node included PC in the network, the unit may get a default IP
address, for example
“192.168.1.168/16”.
After confirmation of self-assigned IP address, the unit starts to speak IP address setting
towards inserted amplifier by SonicIP®
*
function.
Please connect PC with the same network and access that IP address using Web browser.
For more details of settings, please see the help window on Web browser which you can
access with
“http://xxx.xxx.xxx.xxx”.
Note
You can continuously use SonicIP®
*
function everytime turn on the power until you change
the setting of this function to disabled from the setting window on Web browser.
But, after registration on your SIP server, please setup static IP address specifying the
registered address.
Then, it may be preferable to turn off SonicIP®
*
function in order to avoid unnecessary
paging.
6.
SPECIFICATIONS
Power Source
AC Adaptor AD-1215P or its equivalent
Network Interface
RJ-45 connector
10BASE-T / 100BASE-TX, Auto-negotiation
Network Protocol
SIP (RFC3261), TCP. UDP, BOOTP, DHCP, RTP
SNMP, ICMP, HTTP
Audio Format
G.711 u-law / a-law
Control Output
5 channels open collector output
(Max. Voltage: 27V DC, Control current: 50mA Max.)
Removable terminal block (6 pin)
Operating Temperature
-32
°
F (0
°
C) degree to 104
°
F (40
°
C) degree
Finish
Panel: Aluminum, Hairline finish
Dimensions
1.38
”(W) x 3.07” (H) x 3.6”(D)
Weight
0.2lb (86g)
*
IPzator
™
is trademark and SonicIP® is registered by Barix AG