Toa RXA-212, Руководство по эксплуатации, Страница: 10 / 20

When the 4 built-in power amplifiers are used to drive the main speaker systems and monitor
speaker systems, the power amplifier input selectors shown by "
*
" mark should be set
properly.
Sub-mixer to expand input capability
Wireless tuner or other
associated equipment
with line level output.
The line outputs (PGM L.R. FB 1 and FB 2) and Echo Send
output of another RXA-212 or RXA-216 should be connected to
the Sub inputs (PGM L, R, RB 1, FB 2 and Echo) for cascading.
Channel Input Connectors
These XLR connectors are
transformer-isolated, floating and
accept low impedance sources of
+10dB to -60dB nominal level. The
input level must be adjusted by the
input level selector switch and trim
control.
Main Mixer
Record Player with
magnetic cartridge
Foldback Speaker Systems
(Stage Monitor Speaker Systems)
The impedance of the speaker
system connected to the built-in
power amplifier should be 8 ohms.
In case more than two speaker
systems are connected in parallel,
the total impedance also should be
8 ohms.
Main Speaker Systems
Associated equipment with an
output level of -20dB to +4dB,
such as a playback Tape-Deck
Dashed lines
indicates motor
ground of a
record player,
and chassis
ground of a tape-
deck.
Tape-Deck for recording
- 9 -
Connection Example (RXA-216)
All manuals and user guides at all-guides.com