Toa N-8000 SERIES, Руководство по эксплуатации

Страница: 20 / 34

Chapter 3
Settings
Operating Instructions
3-9
The next step is a setting of N-8000 SIP Gateway.
N-8000 SIP Gateway uses a N-8000 Setting file that is <system_name>.pi8. Then the equipment No. that is
programmed in the N-8000 Setting software (in this example, it’s 3). In the left with “Transfer Number” requires
numbers that N-8000 SIP Gateway connects to N-8000 system side by a request from SIP system. The right
box for “Transfer Number” is for SIP telephone number that N-8000 SIP Gateway connects by a request from
N-8000 system.
A setting of SIP server is also needed.
All SIP server has a different way for the setting, therefore the following is just basic setting contents.
· 5 SIP clients for N-8000 SIP Gateway shall be prepared. Extension numbers shall be 3995 to 3999 for this
example.
· Passwords for each extension numbers are set.
Finally SIP server setting is needed for N-8000 SIP Gateway setting. That can be done by selecting from a
menu of “File/SipClientSetting.”
That’s all.