manualshive.com logo in svg

Toa IP-A1SC15, Руководство по установке, Страница: 12 / 49

Поделиться
Скачать
Toa IP-A1SC15 Скачать руководство пользователя страница 12

12

Item

Contents

(6) Password*

Set the password needed to register the unit on the SIP server. 

Initial setting:  Blank

(7) Authentication ID*

Enter the authentication ID needed when registering the unit on an SIP server. 

Place a checkmark in the checkbox when using. 

Initial settings: Checkbox: 

Blank

 

Authentication ID: Blank

(8) Audio Codec

Move the codecs to be used in SIP broadcasts to the Enable frame at right, 

and unused codecs to the Disable frame at left. 

Select the desired codec name button (G722, G711ɥ or G711a) and click on 

the [ ] or [ ] button to move the name to the desired frame. 

When multiple codecs are selected in the Enable frame, the priority of each 

codec can be set by clicking on the [ ] or [ ] buttons to change their order. 

(Higher codecs have priority over lower codecs.)

(9) Ring Time Limit

Set the Max. duration for SIP-connected ringing tones. (Unit: sec.)

Setting range:  25 – 60

Initial setting:  25

(10) Call Time Limit

Set the Max. duration for SIP-connected conversations. (Unit: sec)

Setting range:  1 – 18000

Initial setting:  3600

(11) SAVE button

Click to save the settings and changes. (See 

"Saving Settings & Changes" on 

p. 12

.)

*  Perform settings under the following conditions:

•  For usable characters, please refer to 

"USABLE CHARACTERS" on p. 48

.

•  Max: 31 characters

7.2.  Saving Settings & Changes

When all settings or changes are completed, save their contents.

 Step 1. Click on the SAVE button.

The dialog box, "Changed contents enabled after restart." is displayed.

 Step 2. Click on the OK button. 

Note

The set or changed contents on this screen will not be in effect until the unit has restarted. To restart the unit, 

click on the REBOOT button visible on the Maintenance screen. (Seen 

"Restarting the Unit" on p. 36

.)

Содержание IP-A1SC15


















































Отзывы:

Нет отзывов