5
4.CONNECTION METHOD OF REMOVABLE TERMINAL PLUG
Notes
For audio input and output, shielded lines shall be used.
Avoid soldering cable conductor, as contact resistance may increase when the cable is tightened and
the solder is crushed, possibly resulting in an excessive rise in joint temperatures.
AWG 20
～
28 wire shall be used.
Wire terminal treatment
Wiring steps
Step 1:
Hold down the button on the connection plug.
Step 2:
Plug the wire with the terminal treated into the wire inlet hole, and release the button.
Step 3:
Check the wire for proper location and against short circuit with adjacent wires, make sure it
will not be pulled off.
5.AUDIO INPUT/OUTPUT SIGNAL TERMINAL WIRING METHOD
The audio input terminal features electronically balanced input and may be connected by the
following ways.
Signal
source
H
C
E
The
unit
H
C
E
H
H
C
E
R
L
G
H
C
E
1.2k
1.2k
E
Signal
source
The
unit
Signal
source
The
unit
The audio output terminal features and may be connected by the following way.
The
unit
H
C
E
Amplifier
H
C
E
※
For balanced output of the unit, it must be connected to an amplifier with balanced input, other than
one with unbalanced input.
The audio output terminal may not be connected by any of the following ways.
The
unit
H
C
E
Amplifier
H
E
H
C
E
H
E
H
C
E
H
E
The
unit
Amplifier
The
unit
Amplifier
8mm
Ω
Ω
Shielded line
