URL: https://www.toa.jp/
133-01-00264-00
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo, Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
Step 1. Remove 4 screws on both sides of the optional
speaker system SR-F08.
Step 2. Attach the hand brackets to the SR-F08's
left and right sides using the hex head bolts
supplied with the HY-UV08.
Note
The screws removed in Step 1 cannot be used.
Step 3. Secure the arms to the base using the supplied
hex head bolts.
Step 4. Attach the left and right hand brackets to the
arms with the supplied hex head bolts.
Step 5. Attach the base to the Bracket B of the speaker
mounting bracket to join.
For attachment, use the 4 hex head bolts
supplied with the speaker mounting bracket to
join.
Note
Use all 4 hex head bolts and securely tighten
them.
Step 6. Using the Bracket A of the speaker mounting
bracket to join, install the speaker to the desired
location.
Note
For the installation of the Bracket A, read the
instruction manual of the speaker mounting
bracket to join.
Step 7. Loosen the hex head bolts installed in Step 4,
and adjust the vertical angle of the SR-F08.
Then, securely retighten the bolts.
5. MOUNTING TO THE SPEAKER
Hex head bolt M8 x 25
(Accessories,
2 each on both sides)
Hex head bolt M8 x 25
(Accessories, 2 places)
4
Arm
Base
3
SR-F08
Tightening torque: 8 N·m
SR-F08
1
* Accessories, 4 places
Hand
Hex head bolt
M8 x 25*
2
Attach the hand bracket aligning its curved line
with the SR-F08's front direction.
Tightening
torque: 8 N·m
5
6
HY-C0801
HY-W0801
HY-B0801
Bracket A
Bracket B
(component of
the HY-C0801,
HY-W0801, or
HY-B0801)
Hex head bolts supplied with
the HY-C0801,HY-W0801, or
HY-B0801 (M8, 4 places)
Tightening torque: 8 N·m
7
Hex head bolt M8 x 25
(accessory, 1 each on both sides)
SR-F08
