5
7. CHANGING THE ORIENTATION OF REAR PLATE
The orientation of the speaker system's rear plate can be changed as follows.
[Factory-preset mounting]
Rear plate
Rear plate
8. CHANGING THE SPEAKER'S DIRECTIVITY ANGLE
The speaker system's directivity angle mode is factory-preset to 60°,
but this mode can be changed to 45°, 30°, or 15° by following the
procedure described below.
The figure on the right shows the speaker system in 60° mode.
Step 1.
Loosen the 2 bolts on the input section side.
60
directivity angle
°
Step 2.
Turn the speaker system upside down.
Input section
Then, loosen the 4 bolts indicated by arrows.
