7
7.3. Using as a Floor Monitor
Notes
• When installing the speaker system on slippery floor,
put a non-slip mat under the speaker.
• Do not kick or stand on the speaker system, as this
will damage the speaker.
The figure shows the HS-120 series.
7.4. Attaching the Supplied Rubber Feet
Attach the rubber feet in the case of speaker storage or
on-floor speaker installation.
Note
The rubber foot has a direction (back and forth).
Align the datum line on the rubber foot with the positioning
mark (
) on the speaker unit as shown at right.
Rubber foot
(accessory)
Screw M6 x 30 (accessory)
Datum line
Positioning mark
7.5. Attaching a Handle
The speaker system comes with a handy carrying handle.
Attach the handle on the speaker's top surface.
Screw M6 x 30
(accessory)
Handle fitting bracket
(accessory)
Handle
(accessory)
8. EQUALIZING BY THE DIGITAL SIGNAL PROCESSOR
The speaker system is capable of providing high-efficiency and wide range reproduction without using an
equalizer, however more clear and dynamic sound quality can be reproduced by using our digital signal
processor and performing its settings as shown in the tables below.
[For the HS-120B and HS-120W]
[For the HS-150B and HS-150W]
Filter
Frequency (Hz)
Gain (dB)
Q
HPF (12 dB)
50
1.618
PEQ
580
-5.0
3.134
PEQ
1500
-5.0
2.016
PEQ
3000
-5.0
2.016
PEQ
5000
-2.0
1.414
PEQ
14000
+2.0
0.718
Filter
Frequency (Hz)
Gain (dB)
Q
HPF (12 dB)
50
1.450
PEQ
500
-4.5
1.850
PEQ
1250
-3.0
3.450
PEQ
2900
-5.0
1.850
PEQ
6500
-3.0
1.414
PEQ
14000
+3.0
0.776
