3. INSTALLATION PRECAUTIONS
3. INSTALLATION PRECAUTIONS
•
This long range slim array speakers have
feature a drain hole built into same panel
that holds the speaker cord. For proper
drainage, when installation please ensure
that this panel faces down toward the
ground or follow the instruction of direction
label at the rear case.
•
When using the other bracket, please to use
TOA’s optional bracket solely designed for
mounting this speaker or it must have
strength enough to stand the speaker
weight.
PRECAUTIONS
MAKE SURE THAT SPEAKER IS MOUNTED
WITH THE SIDE INDICATED BY THE ARROW UP.
IF THE SPEAKER MOUNTED UPSIDE DOWN,
RAINWATER GETS INTO THE SPEAKER FROM
AIR VENTS ON THE BOTTOM PLATE, CAUSING
BREAKDOWNS OR ACCIDENTS.
WHEN MOUNTING, BE SURE TO USE TOA’S
OPTIONAL BRACKET SOLELY DESIGNED FOR
MOUNTING THIS SPEAKER. WHEN USING
OTHER BRACKET, IT MUST HAVE STRENGTH
ENOUGH TO STAND THE SPEAKER WEIGHT.
Speaker cord
Case
Drain hole
2. FEATURES
The HA-1010 is long range speaker slim array is composed of multiple horn speaker positioned in an array. It features
long-range sound coverage further than conventional horn speakers, narrowly focused vertical directivity that allows
excessive volume to be controlled at closer proximity, and form a continuous linear sound source, achieving uniform sound
pressure with less attenuation due to distance.
3. INSTALLATION
Step 1.
Make the sign for drill guide at the surface or
location that can structurally support the weight
of the speaker. Prepare the proper dyna bolt
that suitable with hole of bracket. Dimensions
of sign for drill guide and hole of bracket as
shown in the picture.
Guide for
top bracket
Guide for
bottom bracket
50
1287
Surface for drill
25
50
Unit: mm (in)
(1.97”)
(1.97”)
(0.98”)
(50.67”)
Step 2.
Drill the surface that have been marked, install
the proper dyna bolt then the both of top and
bottom bracket.
25
(0.98”)
Holes bracket
4 -
Ø
9
Mounting Bracket
(accessory)
Note
Dyna bolts and nuts are not provided.
Mounting surface
Mounting Bracket
(accessory)
Dyna bolt
Nut
