6.
4 - Rubber foot
4 - Tapping Screw 3 x 14
Subwoofer Unit
Subwoofer Unit
INSTALLATION
Side Corner Wall
Vertical direction
5. INPUT CONNECTION
OUTPUT
RIGHT
LEFT
RIGHT
LEFT
INPUT
Blk
(-)
Red
(+)
Red
(+)
Red
(+)
Red
(+)
Blk
(-)
Blk
(-)
Blk
(-)
9 mm
[ Stripped conductor of cable ]
Input and Output Connector
Reproduction of sound emitted from the subwoofer unit differs depending on installations.
The figure below shows
the appropriate locations for in-door use.
Use standard rubber foot accesories when installing the unit in a flat floor to avoid the units from sliding or moving.
Fixed rubber foot on the side of unit which facing to the floor.
Horizontal direction
CONNECTS SPEAKERS TO THE SUBWOOFER
Switch Position When Using 2 Speakers
9 mm
[Stripped conductor of cable]
Input terminal
* Input Terminal Speaker
OUTPUT
RIGHT
LEFT
RIGHT
LEFT
INPUT
Subwoofer unit
Speaker unit
4 SPEAKER
2 SPEAKER
Speaker unit
Speaker unit
7.
to Amplifier
to Amplifier
Make sure the switch position matches the amount of speakers connected.
Non-Compliance could result in damages to the unit.
Change the switch position
using screw driver (-)
to “2 SPEAKER”.
For wall installation, remove two of the four Flat screw from the unit. Refer to wall bracket mounting dimensions
when installing the brackets.
Remove 2 of 4 Flat screw
For ceiling installation, remove all the Flat screw from the unit. Refer to ceiling bracket mounting dimension
when installing the brackets.
Remove all Flat screw
Fix Subwoofer to
bracket with Flat screw
from subwoofer’s cabinet
from subwoofer cabinet
Fix Subwoofer to
bracket with Flat screw
[Wall Bracket mounting dimensions]
360
30
30
45
8-Ø
9
45
16
-Ø
9
45
30
30
45
45
30
30
45
477
[Ceiling Bracket mounting dimensions]
FB-601B AS
model
SUBWOOFER SYSTEM
MADE IN INDONESIA
IMPEDANCE
CONT.PGM.INPUT
6
Ω
/ CHANNEL
120W / CHANNEL
TOA Corporation
Floor
50
40
50
40
DIMENSIONAL DIAGRAM
210
39
0
Input and output connector
[ Unit : mm ]
563
Switch
[ Front ]
[ Side ]
[ Rear ]
3. FEATURES
•
•
Compact in dimension and compatible for in-door use.
Amount of connected speakers to the unit is selectable by using switch in rear side.
Wall mount, ceiling mount or floor stand application (with standard bracket and accesories).
•
360
55
278
100
103
50
50
50
50
* NOTE :
The switch is factory preset
to “4 SPEAKER”.
2. GENERAL DESCRIPTION
TOA’s FB-601B AS/FB-601W AS is subwoofer system with two input channels and two output channels for setting
with two speaker at each channel. It is designed for in-door use, and is particularly ideal for reproducing
dynamic low-frequency sound for both permanent and temporary installations.
4.
7.1.
6.3. Ceiling Installation
6.2. Wall Installation
6.2. Floor Installation
Install the unit only in location that can structurally support
the weight of the unit and the mounting bracket.
Install the unit only in location that can structurally support
the weight of the unit and the mounting bracket.
360
