8
Step 6.
Retighten the screws on the choke bracket
to fix the speaker cable not to be pulled off.
Step 7.
Rotate the cover plate to close and fix it
by retightening the screw.
Retighten the screws
8. CABLE CONNECTION TO TERMINAL CONNECTOR
Recommended cable types
•
Solid copper wire:
ø1.0 – ø2.0 mm (equivalent to AWG 18 – 12)
•
Stranded copper wire:
0.8 – 3.3 mm
2
(equivalent to AWG 18 – 12)
Step 1.
Loosen the cover mounting screw, and rotate the
Cover plate in the direction indicated by the
arrow in the figure at right.
Step 2.
Detach the removable terminal connector from the
speaker's socket, and loosen the screws of the
terminal to insert wires.
Speaker unit
Cover mounting
screw
Cover plate
Speaker unit
Removable
input connector
Step 3.
Insert the stripped cable end into the terminal and tighten the terminal screws with a screwdriver.
Note
If not making bridge connections,
be sure to tighten unused terminal
screws to avoid their vibration.
[If not bridging]
[If bridging]