background image

11

8. SPECIFICATIONS

Note:

The design and specifications are subject to change without notice for improvement. 

• Accessories 

Front grille  ............................................................ 1

Paper pattern  ....................................................... 1

• Optional Components 

HY-RR2 (Reinforcement ring): 

This is a special fitting for use with the F-2352SC. Use this ring when

mounting the speaker unit to a weak ceiling. This ring can also be used in
conjunction with the HY-TB1, HY-TR1, or HY-AH1.

HY-TB1 (Tile Bar Bridge): 

Place this bridge on the ceiling frame when mounting the speaker unit to
a weak suspended ceiling. 

HY-TR1 (Trim Ring): 

Use this ring when mounting the speaker in pre-existing holes that are
larger than the designated 200 mm (7 

7

/

8

") in diameter.

HY-AH1 (Anchor Hanging Bracket): Attach this bracket to an anchor bolt when mounting the speaker unit to a

weak ceiling.

HY-BC1 (Back Can): 

Use this Back Can when mounting the speaker unit in exposed hanging
applications.

Rated Input 

6 W (High Impedance)

Power Handling Capacity 

Continuous pink noise: 9 W (8 

), 6 W (16 

)

Continuous program:

18 W (8 

), 12 W (16 

)

Impedance 

100 V line: 1.7 k

(6 W), 3.3 k

(3 W), 10 k

(1 W), 20 k

(0.5 W)

70 V line:

830 

(6 W), 1.7 k

(3 W), 3.3 k

(1.5 W), 10 k

(0.5 W), 

20 k

(0.25 W)

25 V line:

830 

(0.75 W), 1.7 k

(0.4 W), 3.3 k

(0.2 W),

10 k

(0.06 W), 20 k

(0.03 W)

16 

, 8 

Sound Pressure Level

89 dB (1 W, 1 m)

Frequency Response

80 – 20,000 Hz (–10 dB), 50 – 20,000 Hz (–20 dB)

at installation in 1/2 free sound field 

(Measured by installing the unit in the center of a ceiling.)

Speaker Component

High frequency: Balanced dome-type

Low frequency: 12 cm (5") cone-type

Mounting Hole

ø200 (7 

7

/

8

") 

Maximum ceiling thickness: 37 mm (1 

29

/

64

")

Input Terminal

Push-in connector (Bridging terminal-2 branch type)

Usable Cable

600 V vinyl-insulated cable (IV wire or HIV wire)

Solid copper wire:

ø0.8 – ø1.6 mm (equivalent to AWG 20 – 15) 

Stranded copper wire: 0.75 – 1.25 mm

2

(equivalent to AWG 18 – 17) 

Finish 

Baffle:

Fire-resistant ABS resin (resin material grade: UL-94 V-0 
or its equivalent), black 

Rim:

Fire-resistant ABS resin (resin material grade: UL-94 V-0 
or its equivalent), white, paint 

Punched net: Steel plate, white, paint 

Dust cover:

Artificial fiber, black 

Dimensions

ø230 (9 

1

/

16

")x Depth 154 mm (6 

1

/

16

")

Weight 

1.5 kg (including front grille)

Содержание F-2352SC













Отзывы: