Toa EXES 6000 CP-64, Функции и инструкции по эксплуатации

Страница: 35 / 102

Paging during Normal Calls
A paging call can be made by a called party of an existing
call to a third party, the third party's response accepted
while the original call is on hold, and the original call
resumed when the response call has ended.
Press
and the desired zone number. This puts the original call on
hold and makes the External PA and or Station paging call.
Then, press
to restore the original call, and wait for the response to the
paging call. When the response is received, press
or replace the handset and the original call goes back on
hold allowing the second call to the taken. When the second
call is completed, press
and the original call can be resumed.
Note.
1. With adoption of the selective functions "Call Trans-
fer" and "Paging", this function is allowed to activate.
2. When 2 or 3 exchanges are connected by tie-line,
paging during a normal call is only possible within the
paging zones allocated to the exchange to which a
station making the paging is connected. And All-call
paging during a normal call is impossible.
Group Hunting
Conversation
Calling party
Called party
When the party you are calling is on another line, your call
is automatically rerouted to another station which is pro-
grammed from the beginning.
When the party to whom the call is rerouted is also on
another line, the call can further be rerouted to the other
station by programming.
Note.
1. To use this function, station No.200 programming of
the station number(s) to which the call is to be trans-
ferred must be set up in the exchange. Place a DIP
switch for Group Hunting in the ON position and
make Group Hunting programming, so that this func-
tion can be programmed.
2. The combined use of this function with the
"Secretary Transfer" function makes the system
more functional. When "Secretary Transfer" function
is employed, setting the Privacy switch to the ON
position allows any incoming call to be automatically
transferred to the other stations even when one is
absent.
3. If station No. 200 programming is made so that the
call can be rerouted to the station which is called first
when the other stations registered are busy, then any
call can be transferred automatically to another
station.
Similarly, the original call can be rerouted one after
another in the "Secretary Transfer".
4. When 2 or 3 exchanges are connected by tie-line,
select the station to which the call is to be transferred
within the same exchange group.
On hold
Station paging
External PA paging
Resuming
the original call
– 32 –