Toa EXES 6000 CP-63 Скачать руководство пользователя страница 58

Страница: 58 / 59

Appendix. Instructions for building the CP-63 in the EXES-5000

1. The CPU-55/56 differ from the CP-62/63 in dial operation.

Function

Continuous Calling Tone

One-touch Response

8 Selectable Make Output

CPU-55

CPU-56

X: 1 ~ 9, Y: 0~ 7

CP-62

CP-63

X: 1 ~ 9, Y: 1 ~ 8, 0 (Clear)

2. Set the DIP switch SW-E-5 (change-over of Privacy and Continuous Calling Tone) to OFF (Privacy). Set the other DIP

switches according to the necessity.

3. The "Automatic Access to Paging" function is not available from the EXES-5000 system. You, therefore, need not

program the "Automatic Access to Paging" function (Function Code No. 54) referred to in Function Code Table for

Station NO No. 200 Programming.

4. Module units necessary for the tie-line system.

Note.
1. To ensure the complete speech functions (perfect simultaneous speech, calls and responses made by means of a

handset, etc.) that the stations of EXES-6000 system can have, 2-wire stations as well as the LM-62 is necessary.

2. The exchange using the frame FR-510 or FR-520 allows for no tie-line connection to the other exchange. The tie-line

connections are only possible among the exchanges using the frame FR-510A, FR-520A, FR-510B, FR-520B, FR-610

or FR-620.

3. For the following module units, you may use whichever you proper: SGD-52A and SG-62 (the SG-62 is necessary

when the LM-62 is used.)

PIU-52A and PI-62

TI-52 and TI-62

4. When the CP-63, OC-62 and DL-62 are used in the tie-line system, the speech link of the calling exchange is in the full

duplex mode, while voice switches cause the speech link of the called exchange to be in the automatic alternative

speech mode.

Function

All functions

Conversation

Conference

Exchange "A"

Exchange "B"

Possible or
impossible

Possible

Impossible

Possible

Impossible

Possible

Impossible

Possible

Reason

2 voice switch passes

1 voice switch passes

3 voice switch passes

1 voice switch passes

Necessary module units

• It is impossible to use both the

CPU-56 and the CP-63 in the

same system.

• DLU-52

• DL-62, OC-62

• It is impossible to use both the

CPU-56 and the CP-63 in the

same system.

• CL-62, DL-62, OC-62

— 57 —

All manuals and user guides at all-guides.com

Содержание EXES 6000 CP-63




























































Результаты поиска

Содержание EXES 6000 CP-63

Отзывы:

Похожие инструкции для EXES 6000 CP-63

Бренды по названию

Популярные бренды

Toa EXES 6000 CP-63, Руководство по установке

Результаты поиска

Содержание EXES 6000 CP-63

Отзывы:

Похожие инструкции для EXES 6000 CP-63

Бренды по названию

Популярные бренды