Model No.
ES-0422
ES-0424
ES-0426
Enclosure Type
Sealed type
Power Handling Capacity
240 W (continuous program)
360 W (continuous program)
360 W (continuous program)
80 W (continuous pink noise)
120 W (continuous pink noise)
120 W (continuous pink noise)
Rated Impedance
8
Ω
Sensitivity
91 dB (1 W, 1 m)
95 dB (1 W, 1 m)
96 dB (1 W, 1 m)
Frequency Response
120 Hz - 20 kHz
Crossover Frequency
3 kHz
Speakers
Low frequency: Two 12cm woofers Low frequency: Four 12cm woofers Low frequency: Six 12cm woofers
High frequency: CD horn + driver (100 ° horizontal x 50 ° vertical)
Input Terminals
M5 screw terminal, Distance between barriers: 14 mm
Enclosure Materials
Wood, urethane paint, white
Grill Materials
Rolled steel plate, acryl paint, white
Dimensions
146 (W) x 430 (H) x 162 (D) mm
146 (W) x 710 (H) x 162 (D) mm
146 (W) x 990 (H) x 162 (D) mm
Weight
8 kg
12 kg
15 kg
Note
: The design and specifications are subject to change without notice for improvement.
•
Matching transformer MT-S0601
To install the MT-S0601 transformer in the speaker system,
remove the blank panel located at the back of the speaker
system. For the installation method, refer to the instruction manual
attached to the MT-S0601 transformer.
[ES-0422]
[ES-0424]
[ES-0426]
Mounting screw (M8)
Mounting screw (M5)
Blank panel
Information
Because the brand mark is attached to the grille using a double-faced tape, it can be easily detached and reoriented
according to the installed speaker direction.
TYPE
Freq.
Gain
Q
HPF
60 Hz
0.707
PEQ
100 Hz +10 dB
2.871
Mounting screw (M8)
Mounting screw (M5)
Blank panel
Mounting screw (M8)
Mounting screw (M5)
Blank panel
MT-S0601
High impedance High impedance
Primary terminal
100 V line
70 V line
83
Ω
60 W
170
Ω
60 W
30 W
330
Ω
30 W
15 W
670
Ω
15 W
7.5 W
•
Mounting brackets HY-0421WL and HY-0421CL
The speaker system can be mounted to a wall or ceiling using the optional mounting bracket HY-0421WL or HY-0421CL.
For details, refer to the instruction manual attached to the HY-0421WL and HY-0421CL.
•
Low frequency equalization by digital signal processors
When using TOA's digital processor, by setting its parameter as shown in the
table at right, low frequency characteristics can be corrected.
APPEARANCE
ABOUT THE COMBINATION WITH OPTIONAL EQUIPMENT
SPECIFICATIONS
133-01-396-0A
URL: http://www.toa.jp/
