142 g (without battery)
89.5 (w) x 38 (h) x 19 (d) mm (microphone body)
Type
1 pc of “AA” (R6S or UM-3U)
Rated Impedance
Directivity
Sensitivity
Frequency Response
Cable Length
Finish
Connector
Dimension
Weight
Battery Power
Electret Condenser Microphone
Unidirectional
2.5 k ohms, unbalanced
-51dB (1 kHz, 0 dB = 1V/Pa)
50 Hz - 12 kHz
10 meters (10,000 mm)
Battery Case: ABS, Black ; Headset: metal, Black
1/4” unbalanced phone jack
Note: - Design and specification is subject to change without notice for improvement.
[Using the microphone]
Plugs the microphone into microphone input on the amplifier. Adjust the volume control.
Place the headset hook over both ears and adjust the mic position by bending the flexible mic holder.
To achieve the best sound reproduction, keep the distance of 1-2 cm between mouth & the mic.
Do not take off the mic cushion as this will create unwanted noise when it is loudly speak.
133040000200
URL : http://www.toa.com.sg/
[Battery insertion]
Open battery cover by push & slide open battery
cover.
Insert a "AA" battery and make sure the polarity
of the battery is correct.
To lock, slide the battery cover until it is properly
lock.
5. OPERATING
6. SPECIFICATION
HEADSET MICROPHONE
model EM-370HS-AS
TOA Corporation ,Japan
MADE IN INDONESIA
89.5
38
31
19
10,000
4. DIMENSIONAL AND DIAGRAMS
83.5
Unit: mm
Flexible Mic Holder
Battery: 1.5V
Phone Plug
[Circuit diagram]
Mic Cushion
Battery Cover
Cushion
Cushion
URL : http://www.toa.com.sg/
