5
2. GENERAL DESCRIPTION
TOA's DP-L2 is a 1U size* rack-mountable digital audio processor having an ambient noise control (ANC)
function which automatically adjusts output sounds in response to changes in ambient noise level. It also
features an automatic level control (ALC) function that automatically adjusts the input signal level to an
appropriate level.
*1U size: 44.5 mm (standard size)
3. FEATURES
• ANC function distinguishes between the unit's output sound and the ambient noise. (The unit's output sound
is not detected as noise.)
• Various types of microphones, including ceiling flush mounted, dynamic and condenser types, usable for
detecting ambient noise.
• Monitoring of sound collected via the ambient noise sensor microphone.
• Front-mounted LED meters for the input and output signal levels, and ALC and ANC levels.
• Easy setting of each function with the front-mounted LCD (liquid crystal display), keys and knobs.
4. HANDLING PRECAUTIONS
• The supplied power supply cord is designed for exclusive use with this unit. Never use it with other
equipment.
• Install the unit in locations where the temperature is between 0 and +40°C and the moisture is less than 90%
(no dew condensation must be formed).
• The DP-L2 is a precision audio component. To prevent failure, avoid locations where the unit may be
exposed to strong shocks or vibrations.
• To clean, be sure to first switch off the unit's power, then wipe with a dry cloth. When the unit gets very dirty,
use a cloth damped in a neutral cleanser. Never use benzene, thinner or chemically-treated cleaning cloth
because such volatile liquids could deform or discolor the unit.
• FCC Rules (CU version) and Class A ITE (CE version)
The CU version complies with Part 15 of the FCC Rules.
The CE version complies with Class A ITE.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.
