Toa CX-124, Руководство по эксплуатации

Страница: 10 / 16

Stereo Input Jack [STEREO IN]
These RCA pin jacks are unbalanced, with a nominal of –10 dB and an impedance of 10k ohms.
The Stereo input jacks should be connected to an outboard stereo unit (ie., Tape deck, CD player).
Cue Output Jack [CUE OUT]
These 1/4" phone jacks are unbalanced, and provide the same signal as the Headphone output, and
are used for monitoring the signals of the Cue busses through monitor speakers. This jack has a
nominal output level of +4 dB and an impedance of 1k ohms.
Aux Send Jack [AUX SEND]
These 1/4" phone jacks can be used in conjunction with the Aux return jack to connect an outboard
effects device (ie., Delay or Reverb) to this mixing console. The Aux send jack should be connected
to the input of the effect. Nominal output level is +4 dB with an impedance of 1k ohms.
Recording Output Jack [REC OUT]
These RCA pin jacks are unbalanced, with a nominal output level of –10 dB and an impedance of 1k
ohms. These jacks provide pre-Stereo fader signals for connection to tape recorders.
Group Output Connector [GROUP OUT]
The electronically balanced XLR connectors have a nominal output level of +4 dB and an impedance
of 600 ohms.
Stereo Output Connector [STEREO OUT]
The electronically balanced XLR connectors have a nominal output level of +4 dB and an impedance
of 600 ohms.
Sum Output Connector [SUM OUT]
The electronically balanced XLR connector has a nominal output level of +4 dB and an impedance
of 600 ohms.
Power Switch [POWER]
This switch provides AC power to the mixer. Power should only be applied after all audio connections
have been completed. The power LED indicator lights when the switch is "on".
AC Power Cord
– 10 –