Toa CB-600, Руководство по установке

Страница: 12 / 14

<PAGING ZONE> (FUNCTION CODE 70)
NOTES
1 . To release at one time the data programmed into all the Zones for this function,
(Confirmation tone will be heard)
Touch
2. Re-start at Step 1 when mis-dialling occurs. (All other registrations remain valid.)
3. Switch C-1 must be "ON" to employ this function.
4. Also dial 2 digits (01 to 07) to programme the system having paging zones 1 to 7.
Ex. Zone No. 7
5. When "Paging Response Without Zone Number" mode
by the DIP Switch SW-C-7, this registration is essential.
6. When "Paging Priority" function is adopted by the DIP Switch SW-C-3, this registration
should be made for each Paging Zone of No. 01 to No. 3 1 .
7. The programming is required for zones 01 to 31 when the telephone line interface is
in use.
8. Zone numbers of each exchange in Tie-line system.
Exchange "A"
Exchange "B"
Exchange "C"
is selected
9. Dial 2 digits when programming the station for 2-digit dialling. Dial last 3 digits for
station programming when 4-digit dialling is employed.
No. 0 1 ~ 1 5
No. 1 6 ~ 3 0
No. 31~45
Establishment of each paging zone
Touch
Function Code
Paging Zone No.
( 0 1 ~ , 1 6 ~ , 3 1 ~ )
First Station No.
of the Zone
Last Station No.
of the Zone
Paging Zone No.
( 0 1 ~ , 1 6 ~ , 3 1 ~ )
First Station No.
of the Zone
Last Station No.
of the Zone
Confirmation tone
New Registration finished?
Return
– 12 –