OPERATION
1. Press the power switch
and ensure that the power indicator
lights. (If the power indicator does not light, check the power cord
for correct connection.)
2. Insert the microphone plug into Mic 1 input jack .
3. Turn on the microphone switch and adjust the volume using Mic 1
volume control . When using Mic 2, connect the microphone to Mic
2 input jack
and adjust the volume with Mic 2 volume control
.
Up to two microphones can be used per amplifier.
4. When using a tape recorder or radio, connect the earphone terminal
or LINE OUT terminal of the tape recorder, etc. to the auxiliary input
jack
by means of a shielded wire. Use the volume control of the
tape recorder, etc. to adjust the volume.
To connect the amplifier to the tape recorder, use either a
commercial "phone plug-to-miniature plug" cord or such a
connection cord as is shown below.
Solder Hot and Cold in the shielded cable correctly so that they
do not contact each other.
Note:
The design and specifications are subject to change without notice for improvement.
Phone plug
r
e
d
r
o
c
e
r
e
p
a
T
r
e
i
f
il
p
m
A
Hot
Cold
Miniature plug
Shielded cable
SPECIFICATIONS
Accessories
Dynamic microphone (with talk switch) .............................. 1
Microphone holder ............................................................. 1
Mounting screw (4 x 16) ................................................. 2
Mounting bracket ................................................................ 1
Mounting screws
Hexagon bolt (M5x15) .................................................... 2
Screw (M4x8) ................................................................. 4
Nut (M5) ......................................................................... 2
Spring washer (M5) ........................................................ 2
Spring washer (M4) ........................................................ 4
Plain washer (M5) .......................................................... 4
Plain washer (M4) .......................................................... 4
Power cord (1.5 m) ............................................................. 1
Speaker cable (0.3 m) ........................................................ 1
Fuse (CA-115: 4 A / CA-130: 8 A / CA-160: 12 A) ............. 1
Model No.
Power Source
CA-115
CA-130
CA-160
Standard voltage: 14 VDC
Operating range: 10 – 16 VDC (12 V battery)
Current Consumption
Under 3 A
(rated output)
Under 5 A
(rated output)
Under 9 A
(rated output)
g
k
9
.
0
t
h
g
i
e
W
(amplifier only)
1.1 kg
(amplifier only)
1.2 kg
(amplifier only)
Input
Mic 1: 600
Ω
, 4 mV
(Usable plug: ø6.3 mm phone plug)
Mic 2: 600
Ω
, 4 mV
(Usable plug: ø6.3 mm phone plug)
Aux:
10 k
Ω
, 500 mV
(Usable plug: ø6.3 mm phone plug)
Supplied Microphone
Uni-directional dynamic microphone
(with talk switch)
Impedance: 600
Ω
Sensitivity: –53 dB (1 kHz, 0 dB =1 V/Pa)
Rated Output
15 W
30 W
60 W
)
t
u
p
t
u
o
d
e
t
a
r
,
z
H
k
1
(
%
5
r
e
d
n
U
n
o
i
t
r
o
t
s
i
D
Frequency Response
100 Hz – 10 kHz within ±3 dB
Dimensions (mm)
178 (w) x 50 (h) x 132 (d) 178 (w) x 50 (h) x 144 (d) 178 (w) x 50 (h) x 170 (d)
533-01-043-10
