Toa C-CV44-3 NTSC Скачать руководство пользователя страница 3

3

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section in order to ensure long,

trouble-free operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings

regarding safety.

• After reading, keep this manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages are used in this manual to prevent bodily injury and property damage which
could result from mishandling. Before doing anything else, read this section first so you are thoroughly aware
of the potential safety hazards as well as understanding the safety symbols and messages. 

• This is a class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

• To prevent lightning strikes, install the unit at least 5 meters away from a lightning conductor yet within the

protective range (angle of 45 degrees) of the lightning conductor. Lightning may cause a fire, electric shock,
or personal injury.

• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.

Doing otherwise may result in the unit falling down and causing personal injury.

• Use nuts and bolts that are appropriate for the ceiling’s wall’s structure and composition. Failure to do so

may cause the unit to fall, resulting in material damage and possible personal injury.

• Tighten each nut and bolt securely. Ensure that the bracket has no loose joints after installation to prevent

accidents that could result in personal injury.

• Have the unit periodically checked by the dealer from where it was purchased. Should the unit or its mounts

corrode or structurally deteriorate, the unit could fall down, possibly resulting in personal injury.

• Should any of the following irregularities be found during use, immediately switch off the power, disconnect

the power supply cord from the AC outlet and contact your TOA dealer. Do not attempt to further use the unit
because a fire or electric shock may result. 

• If you detect smoke or a strange smell coming from the unit.
• If water or a foreign object enters the unit. 
• If the unit falls or the unit case breaks.
• If the power supply cord is damaged (exposure of core or disconnection).
• If no image is displayed on the screen.

• Do not insert nor drop metal pieces or flammable materials into the unit’s ventilation slots as this may result

in fire or electric shock.

Indicates a potentially hazardous situation which could result in death or
serious personal injury if ignored or mishandled.

WARNING

Indicates a potentially hazardous situation which could result in
moderate or minor personal injury, and/or property damage if ignored
or mishandled.

CAUTION

• Leave the unit’s installation to the dealer from where the unit was purchased because the installation

requires expert knowledge. Inadequate installation may cause the unit to fall, possibly resulting in personal
injury.

• Do not hang from the unit, as the unit may fall, possibly resulting in personal injury. 
• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. The unit or its mounts may be

subject to corrosion, which could cause the unit to fall, possibly resulting in personal injury.

• Do not touch the unit’s sharp metal edge, as this could result in personal injury.

Содержание C-CV44-3 NTSC

















Отзывы: