background image

INSTRUCTION MANUAL

COLOR DOME CAMERA

C-CV202-F3 CU

Thank you for purchasing TOA's Color Dome Camera.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your color dome camera.

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important

precautions are included.

• We also recommend you keep this instruction manual handy for future reference.

• Use the unit only with the voltage specified on the unit. Using a

voltage higher than that which is specified may result in fire or
electric shock.

• Use screws and bolts that are appropriate for the ceiling's or wall's

structure and composition. Failure to do so may cause the unit to fall,
resulting in material damage and possible personal injury.

• Install the unit only in a location that can structurally support the

weight of the unit and the mounting bracket. Doing otherwise may
result in the unit falling down and causing personal injury and/ or
property damage.

• Do not install the unit outdoors since it is designed for indoor use. If

installed outdoors, the aging of parts causes the unit to fall down,
possibly resulting in personal injury. Also, when it is exposed to rain,
an electric shock may result. 

• To prevent a fire or electric shock, never open the unit case nor

modify the unit as there are high voltage components inside the unit.
Refer all servicing to your nearest TOA dealer.

• Should any of the following irregularity be found during use,

disconnect the power supply and contact your TOA dealer. Do not
attempt to further use the unit because a fire or electric shock may
result. 

·

If you detect smoke or a strange smell coming form the unit

·

If water or any metallic object gets into the unit

·

If the unit falls, or the unit case breaks

·

If the power supply cord is damaged (exposure of the core,
disconnection, etc.)

·

If no image appears

• Do not insert nor drop metallic objects or flammable materials in the

ventilation slots of the unit's cover, as this may result in fire or electric
shock.

• Have the unit periodically checked by the dealer from where it was

purchased. Should the unit or its mounts corrode or structurally
deteriorate, the unit could fall down, possibly resulting in personal
injury.

• Avoid installing the unit in humid or dusty locations, in locations

exposed to the direct sunlight, near the heaters, or in locations
generating sooty smoke or steam as doing otherwise may result in
fire or electric shock.

• Note correct polarity (positive and negative orientation) when

connecting the power supply cable. Incorrect connection may cause
failure of other equipment connected. 

• Leave the installation of the unit to your TOA dealer because the

installation requires expert experience and skills. If the unit falls, this
could cause personal injuries.

• Do not hang down from the camera as this may cause it to fall down

or drop, resulting in personal injury and/ or property damage.

• Disconnect the power supply, and unplug the power supply plug from

the AC outlet for the safety purposes when cleaning or leaving the
unit unused for long periods of time. Doing otherwise may cause a
fire or electric shock.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

CAUTION

Indicates a potentially hazardous situation which, if mishandled,
could result in death or serious personal injury.

WARNING

Do not expose the unit to rain or an environment where it may be
splashed by water or other liquids, as doing so may result in fire or
electric shock.

WARNING

CU version complies with Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

This Class B digital apparatus compliance with Canadian ICES-
003.

Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.

Note

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for
help.

Modifications

Any modifications made to this device that are not approved by
TOA Corporation may void the authority granted to the user by
the FCC to operate this equipment.

Содержание C-CV202-F3

Страница 1: ... shock Note correct polarity positive and negative orientation when connecting the power supply cable Incorrect connection may cause failure of other equipment connected Leave the installation of the unit to your TOA dealer because the installation requires expert experience and skills If the unit falls this could cause personal injuries Do not hang down from the camera as this may cause it to fal...

Страница 2: ...re quality In such cases change the wiring If there is a strong electric or magnetic field near the camera such as television transmission antennas motors or transformers this may distort or roll the monitor picture In such cases run the entire wiring route through metal conduit tubing Do not install the camera in locations where solvents or chemicals are used as the camera s dome cover may be def...

Страница 3: ... the screw Extreme force is applied to the screw and the screw could not be removed as this may cause the dome cover not to become detached 1 Switch on the power supply of 12 V DC after completing camera connections The power is supplied to the camera 2 Connect the monitor to the Monitor Output terminal to permit a picture to be viewed on the monitor Note When the monitor output terminal is connec...

Страница 4: ...Set this switch so that the subject is not displayed in black when backlit Shutter Speed switch OFF Always set to this position ON Do not set to this position 9 SPECIFICATIONS 12 V DC 10 1 2 W 100 mA 1 4 Type IT CCD 768 H x 494 V 380 000 pixels 2 1 interlace Horizontal 15 734 kHz Vertical 59 94 Hz VBS1 0 V p p 75 Ω RCA pin jack VBS1 0 V p p 75 Ω BNC R jack Internal synchronization Horizontal 480 l...

Отзывы: