3. INSTALLATION
Step 1.
Remove the baffle.
Use a thin screw driver or
a thin tip to remove.
Step 2.
Make wiring.
2-1.
Insert the lead-in cables (cables from the
amplifier) and lead-out cables (cables to
other speakers) into the screw terminals
attached to the cabinet for each of the two
built-in speakers.
2-2.
Insert the fastens fitted at the ends of the
HOT and COM cables from the screw
terminals inside the cabinet into the taps of
the matching transformer. Connect the COM
cable to the transformer's COM tap, and the
HOT cable to the desired transformer's input
tap (Refer to the figure at right.)
The table below shows the relationship
between impedance and input power.
Matching transformer connection
Impedance
1.67 k
Ω
3.33 k
Ω
6.67 k
Ω
100 V line
6 W
3 W
1.5 W
3
