Specifications
*Specifications are subject to change without notice.
1 3 3 - 0 2 - 5 8 4 - 6 0
Printed in Japan
Controls
Indicators
Protection
Connectors
Power Consumption
Temperature Range
Dimensions in inches (mm)
(high)×(wide)×(deep)
Weight
Color
Other Features
1 Mic/Tel gain control
1 Program gain control
1 Bass tone control
1 Treble tone control
1 Power ON/OFF switch
1 Mic/Tel selector switch
1 Power LED
Self protection, with 1 AC fuse
MIC/TEL input - Screw terminal
strip
Program input ---- Screw terminal
strip and RCA
phono jack
Outputs-------------- Screw terminal
strip
Mute --------------- Screw terminal
strip
AC power cord/plug --- SVT,
3-prong type
AC outlet — 3 pin grounding type
AC 120 Volts, 60Hz, 17 watts
-10°C to+60°C (12°F to 140°F)
3.68"(93.5)×8.27"(210)×8.9"(226)
Rack-mounting space size "2U"
(3.46")
6.5 Ibs. (2.95Kg)
Silver
Automatic electronic drive limiter
Electronic muting
Type
Output Power
Power Band Width
Frequency Response
Total Harmonic
Distortion
Inputs
Input Sensitivity/
Impedance
Outputs
(Transformer-isolated)
Output Regulation
(1KHz)
Signal to Noise Ratio
(Band Pass
20-20,000Hz)
(Tone Controls Centered)
Tone Controls
2-channel mixer power amplifier
10 watts R MS
50- 20,000Hz 1%THD
50- 20,000Hz ±1dB
0.5% or less, at 1 KHz, rated output
0.1% or less, at 1 KHz, 5W output
MIC/Telephone Page Input
Program Input (Screw terminal strip
input and RCA phono jack input)
*Note: Two (2) program inputs
cannot be used at the same time.
Mic: 1mV (-60dBv)/600 ohms,
balanced
Telephone Page: 100mV (-20dBv)/
600 ohms, balanced.
Program: 200mV (-14dBv)/10k
ohms, balanced for Screw
Terminal, unbalanced for
RCA Phono Jack
Balanced 4, 8 ohms, 25 & 70 volts
Less than 2.0dB, no load to full
load.
Mic: 64dB
Telephone Page: 77dB
Program: 77dB
Bass;±10dB at 100Hz,
Treble; ±10dB at 10KHz
Controls affect only program input.
TOA ALL-PURPOSE AMPLIFIER
