6. CONNECTION
Step 1.
Strip the cable sheath 9 mm (0.35") from the cable end.
Note:
Use a Strip gauge printed on the nameplate.
Step 2.
Insert each cable conductor fully into the terminal hole according to the indications (N, R,
and SP) marked on the unit's case.
Note:
The cable conductor can be inserted without holding down the terminal push
button. To disconnect it, pull out the cable while holding down the push button.
From Speaker
[Terminal indication
and Color]
Note:
To prevent biting or pull-off of
cable, insert an intact, unbent
cable conductor straight.
Push button
N
RS
P
(BLK) (RED) (GRY)
m
m
")
9
35
.
(0
Strip gauge
Case
When
When
9 mm (0.35")
connnecting
disconnnecting
[Applicable cables]
600 V vinyl insulated wire (IV wire or HIV wire).
Diameter of core wire (copper wire): 0.8 mm − 1.6 mm (AWG 20 − AWG 14)
7. WIRING METHODS
[2-wire system]
[3-wire system]
Attenuator
Attenuator
N R
SP
NR SP
+
+
-
Speaker
Speaker
HOT
N
-
HOT
N (Normal)
R
R (Emergency)
COM
COM
COM
COM (Common)
[Attenuator terminal block color]
[Speaker terminal block color]
N: Black, R: Red, SP: Gray
N: Black, R: Red, COM: White
Traceability Information for Europe
Manufacturer:
Authorized representative:
TOA Corporation
TOA Electronics Europe GmbH
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Suederstrasse 282, 20537 Hamburg,
Japan
Germany
URL: https://trungchinhaudio.vn
533-06-265-60