TNT Rescue BFC-320, Руководство по эксплуатации

Страница: 14 / 30

TNT-OM # 7.2.3-041 Rev: 03-14-2016 14/30
Trouble Shooting:
PROBLEM CAUSE REMEDY
The couplers cannot be connected.
1) There is dirt or debris in the
coupler.
2) The system is under
pressure.
1) Remove the debris and
ensure the couplers are
clean.
2) Disengage the pump.
The tool does not react when turning
the valve to the open or closed
position.
1) The power unit is in the
neutral position.
2) The power unit is not
running
3) The tool is not properly
connected.
4) There is an insufficient
amount of hydraulic fluid in
the power unit.
1) Engage the power unit.
2) Start power unit
3)
Ensure that couplers are
connected.
4) Fill power unit to the proper
level.
Engine will not start.
1) The switch is in the off
position.
2) The pump is engaged.
3) The oil level switch on the
engine is activated.
4) The choke is in the wrong
position.
5) The power unit is out of fuel.
1) Turn the switch on.
2)
Return the control valve to
the neutral position.
3) Add engine oil to proper
level.
4) Adjust the choke according
to the engine operation
manual.
5) Check and add fuel.
Recoil will not pull.
1)
The power unit is engaged.
2) The recoil case is damaged.
1)
Return the control valve to
the neutral position.
2) Contact your authorized TNT
Service Representative.
*Call Your Authorized TNT Distributor For Maintenance And Annual Service
Care / Preventative Maintenance.*
TNT Rescue Systems, Inc.
2490 West Oak Street
Ashippun, WI 53003
920-474-4101 or 800-474-4189
E-Mail: email@tntrescue.com