USER MANUAL
| LR-15: Radar-activated flashing beacons
9
4.3
CONFIGURATION PARAMETERS OF PARAMETERS
All system settings and parameters can be modified by a customer through the system menu. Parameters are
assembled into the following groups:
•
Speed thresholds for beacons and auxiliary output.
•
Beacons flashing parameters and power settings.
•
Traffic statistic recording parameters.
•
Real-Time Clock settings.
•
Advances system settings.
•
Finetuning radar parameters.
Press the “Enter” (Blue) to access the selected group of parameters or “Up” / “Down” (White) buttons to
select the
required group. You can choose to exit this to the diagnostics menu by pressing the
“Esc” (Yellow) button.
When a group of parameters is selected you can navigate between each individual parameter using “Up” / “Down”
(White) buttons to review or change them.
Press the “Enter” (Blue) button when the
parameter
is displayed to change the value. Use “Up” / “Down” (White)
buttons to edit the value and press the “Enter” button again to accept
the
new value. You can press the “Esc”
(Yellow) button to cancel all changes.
4.3.1
BEACONS AND AUX ACTIVATION THRESHOLD’S
•
STROBE-ON
–
activate beacons when currently measured speed is above this threshold.
•
STROBE-OFF
–
turn off beacons when currently measured speed is above this threshold.
•
AUX-ON
–
activate auxiliary when currently measured speed is above this threshold.
•
AUX-OFF
–
turn off the auxiliary output when the currently measured speed is above this threshold.
4.3.2
BEACON PATTERNS AND POWER SETTINGS
•
FLASH MODE
–
beacons flashing patterns (see 2.3).
•
BRIGHTNESS
–
default
beacon’s
brightness in the percentage of maximum.
•
12V OUTPUT
–
outputs voltage adjusted to 12V (enabled/disabled). If DISABLED, both beacons and the
auxiliary output will be powered with the power supply voltage.
4.3.3
TRAFFIC STATISTIC RECORDING PARAMETERS
•
SPEED-FROM
–
speed bins settings: the unit will record speed bins beginning from the selected speed
•
SPEED-TO
–
speed bins settings: the unit will record speed bins up to the selected speed.
•
BIN-WIDTH
–
speed bins settings: width of speed in (in selected speed units)
•
PERIOD
–
speed bins settings: write speed bins record to file with this interval.
•
TARGETS LOG
–
record raw daily logs of vehicles with all parameters (enabled/disabled). This is the most
detailed form of information.
