
42
In most cases it will require a little more work to get both wheels off the ground. Place a thick wooden
plank or other object on the floor, making sure that the plank is long enough to easily accommodate the
width of your center stand. Roll the scooter over the plank and put the bike on the center stand, with the
stand sitting on top of the plank. Then lift the front wheel of the scooter off the ground and place something
underneath the frame to support the front of the scooter. Make sure the scooter is stable and cannot fall or
be knocked over easily.
4.
eNGINe (opTIoNAl)
If you are placing your scooter into storage in an unheated area, temperature fluctuations may cause
condensation inside the cylinder of the engine. Condensation could cause rust and corrosion to the cylinder
wall.
To reduce the chance of getting rust or corrosion, perform the following steps:
Remove the spark plug.
•
Squirt about 2 ounces of 2-cycle oil into the cylinder. (This applies to both 2 and 4-cycle engines.)
•
With the spark plug still out, turn the engine over a few times.
•
Reinstall the spark plug.
•
5.
COVER
TNG Scooters come standard with a nylon weather cover. Placing the cover over the scooter while it is in
storage will reduce the dirt and dust, which would naturally accumulate on the scooter.