TX7930 Handheld Programmer
Installation & Operation Manual
4050100262-Rev1.2-1217
TANDA UK
Specifications are subject to change w ithout prior notice
5
1.4 Names and Location
①
Data Display
16 Characters, four-segment display shows the device address, set types
and mode and ID value
②
Function Key
Allow easy single-button activation of the common used parameters such
as exit, clear, page, read and write function
③
Numerical Key
0 to 9 keys used to enter numeric values
④
Jack Socket
Location for male connector of programming cable
⑤
Loop Terminal
Connection to signaling loop used for testing the loop wiring
⑥
Label
Programmer details and specification
⑦
Battery Compartment Location for programmer batteries
2 Operation
This programmer must be operated and maintained by a qualified or factory trained service
personnel. Check the package contains before using your programmer.
Package contains the following:
1.
TX7930 Programmer
2.
Twin 1.5 AA Battery
3.
Programming cable
4.
Strap belt
5.
User guide.
2.1 Installing of Batteries
This programmer has been designed to allow changing the battery quickly and easily.
1.
Remove the battery compartment cover and insert the two AA batteries.
2.
Make sure the positive and negatives ends are facing the correct directions.
3.
Close the battery cover and press down until it clicks into place.
Warning: Dispose the used batteries according to the local regulation.
Figure 1
